How to design a custom shipping crate for your FRC robot
A competition robot is a precision-built machine, yet it may spend days surrounded by freight, forklifts, loading docks and changing weather. A well-designed shipping crate protects the robot from those conditions while making inspection, unloading and pit setup faster for the team.
The best crate is designed alongside the robot rather than after construction is complete. Its internal supports, access panels, lifting points and dimensions should reflect the robot’s frame, bumpers, battery location, electronics and tools that must travel with it.
For Australian teams, transport planning deserves early attention. A robot travelling from Brisbane to Melbourne faces different practical constraints from one sent overseas to an event in the United States. Freight pricing, road dimensions, timber treatment, customs paperwork and airport handling can all influence the final design.
A strong crate also becomes part of the team’s operating system. Clear labels, a packing diagram and a repeatable loading process reduce last-minute errors at an event. The same habits support younger students learning design thinking through programs such as FIRST LEGO League, including teams working with SPIKE Prime resources.
Start with the robot and its journey
Measure the robot in its competition-ready state, including bumpers, protective guards, battery mounts and any components that cannot be removed safely. Record length, width, height, mass and the location of fragile items. Leave enough clearance for padding without allowing the machine to shift during transport.
Then map the journey. A crate sent by courier may be moved with a pallet jack, while one loaded into a shipping container could be exposed to vibration, condensation and stacked freight. Ask the carrier about maximum dimensions, weight limits, forklift access and whether the crate must be palletised. A Sydney-to-Melbourne road shipment has different requirements from international air freight through an airport.
Design the crate around the most demanding realistic condition, not the gentlest leg of the trip. If the robot may be handled from either side, provide access and markings on both sides. If a crate will be stored outdoors at an event, use weather-resistant finishes and keep the robot raised above standing water.
Choose materials that balance strength and weight
A plywood box is often the most practical option for an FRC robot because it is repairable, relatively affordable and easy for students to modify. Exterior-grade plywood is preferable to interior sheet material, while structural timber or aluminium angle can reinforce corners and mounting points. Avoid making every panel excessively thick; unnecessary mass increases freight cost and makes manual handling unsafe.
Use bolts, washers and threaded inserts where panels may need to be removed repeatedly. Screws are suitable for fixed joints, but a damaged screw hole can become a problem after several event cycles. Recessed fasteners reduce snagging, and metal corner protectors can protect edges from impacts.
Timber used for international freight may need to meet import requirements such as ISPM 15 treatment and marking. Australian teams should check the destination country’s biosecurity rules and the freight provider’s documentation before construction. Untreated timber can cause delays, quarantine inspection or repacking at the border.
Build a suspension system inside the box
The robot should sit on a stable platform rather than directly on the crate floor. Rubber feet, dense foam blocks or elastomer mounts can reduce shock and vibration, but the support points must contact strong parts of the chassis. Never press padding against delicate wiring, pneumatic tubing, sensors or freely moving mechanisms.
Use positive restraints to stop movement in every direction. Straps, removable braces and padded blocks can hold the robot against its frame without crushing bumpers or stressing wheel assemblies. A useful design allows students to release the restraints with common tools and provides obvious storage locations for each brace.
Consider a removable loading ramp or slide if the robot is heavy. A ramp is particularly valuable when a team lacks access to a forklift at the destination. For Australian freight, where a crate may be moved between a ute, depot and venue, lifting handles and a sensible centre of gravity can prevent dangerous improvisation.
Protect electronics, mechanisms and loose equipment
Electronics need protection from impact, static discharge and moisture. Cover the control system and motor controllers with a rigid shield that cannot fall onto the components. Keep the battery in an approved, clearly marked container and follow the carrier’s rules for lithium-based batteries. Batteries should not be left loose inside the main crate.
Create separate, labelled compartments for chargers, spares, tools, programming equipment and documentation. A shallow organiser fixed to the lid can hold fasteners and small parts, while a removable tool case prevents the entire crate from being unpacked to find one hex key.
Before sealing the crate, inspect connectors, cable retention and exposed mechanisms. Teams can use Maryland FIRST Robotics’ guidance on FRC electrical troubleshooting as part of a pre-shipment check. A crate cannot compensate for a loose terminal or an unprotected connector that fails after vibration.
Make access, labelling and inspection simple
A removable lid is convenient, but a hinged lid with locking stays can be safer in a busy pit. Whichever style you choose, include enough opening area for inspection staff to see the robot without unloading everything. Transparent inspection panels are useful for confirming that restraints are still engaged, though they are not essential.
Mark the crate on all visible faces with the team number, contact details, gross weight, centre of gravity and handling instructions. Use large lettering that can be read from a loading dock. Add “This way up”, “Do not stack” or lifting-point labels where appropriate, but only include instructions the freight provider can realistically follow.
The table below compares common construction choices for a student robotics team planning a reusable crate:
| Design element | Practical choice | Main benefit | Watch point |
|---|---|---|---|
| Outer panels | 12–18 mm exterior plywood | Strong and repairable | Can become heavy |
| Frame | Timber battens or aluminium angle | Reinforces corners and edges | Check joints for loosening |
| Interior padding | Closed-cell foam and rubber | Absorbs vibration without holding much moisture | Avoid pressure on fragile parts |
| Fasteners | Bolts, washers and inserts | Supports repeated assembly | Requires accurate drilling |
| Base | Reinforced pallet-style platform | Easier forklift and pallet-jack handling | Adds height and mass |
| Lid | Hinged or fully removable | Provides loading flexibility | Must be secured against movement |
| Finish | Exterior paint or sealant | Improves moisture resistance | Allow full curing before packing |
Test the crate before competition
A shipping container should be tested with the actual robot, not just an empty mock-up. Load every component, close every latch and move the crate through doorways, ramps and vehicle loading positions. Check that no part touches the walls when the crate is tilted gently and that the robot can be removed without lifting hazards.
A short local transport test can reveal problems that drawings miss. Send the crate across town or take it to a school event, then inspect for shifted padding, loose hardware, water entry and damaged labels. If travelling from Perth or Adelaide to an interstate competition, test the crate under conditions that approximate longer freight rather than relying only on workshop inspection.
Make a packing checklist with photographs. Include battery handling, restraint installation, tool inventory, documentation and final latch inspection. Give the checklist to more than one student so the process does not depend on a single builder or mentor.
Plan for repair as carefully as you plan for protection. Carry spare latches, washers, foam, straps, tape and basic hand tools in a marked service kit. A small supply purchased from an Australian hardware retailer such as Bunnings may be easier to replace locally than specialised crate hardware ordered from overseas.
Turn the crate into a reusable team asset
A crate should survive several seasons, but the robot inside it will change. Use adjustable rails, removable brackets and replaceable foam so the interior can evolve. Keep a drawing or digital model with internal dimensions, hardware sizes and the location of every restraint.
Record the empty crate weight and packed gross weight in both kilograms and, when relevant, pounds. Freight forms and international carriers may use different units. Also photograph the packed crate before dispatch; the images can support an insurance claim or help a receiving team understand how the robot was secured.
Treat the crate as part of the team’s safety culture. Students can practise lifting, use gloves when handling rough timber, and learn why heavy loads require coordinated movement. Broader robotics applications, including public safety robotics, show how engineering decisions must account for reliable operation in demanding real-world environments.
Set a final shipping deadline that leaves time for repairs and documentation. Before collection, confirm the carrier, destination contact, battery requirements, customs paperwork and event delivery window. A carefully engineered crate protects months of design and programming work, while a repeatable process gives students confidence from workshop departure to the first match.
Use this approach as a team workshop project: measure the robot, sketch two or three crate concepts, estimate mass and freight cost, then build and test the strongest practical version. Involving students in each decision turns transport into another hands-on engineering challenge and helps your FRC program arrive ready to compete.
Maryland FIRST Robotics